Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP
Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP

Gas Connector Stainless Steel Coated Less Valve - 1/2 O.D. 1/2 MIP x 1/2 MIP

Model #:


• Tubing: Annealed, 304 stainless steel (ASTM A240)
• Coating: Custom Formulated Polymer
• Approved for indoor and outdoor use
• Temperature rating of connector with adapters: -40°F to 150°F
• Flare nuts: Brass or plated steel
• Adapters: Brass or plated steel Meets SAE J512 standard
• 100% factory leak tested
• Compliance: Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters - connector length may not exceed 36"


• Tubing: Annealed, 304 stainless steel (ASTM A240)
• Coating: Custom Formulated Polymer
• Approved for indoor and outdoor use
• Temperature rating of connector with adapters: -40°F to 150°F
• Flare nuts: Brass or plated steel
• Adapters: Brass or plated steel Meets SAE J512 standard
• 100% factory leak tested
• Compliance: Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters - connector length may not exceed 36"

Technical Data
Spec Sheet
Installation Instructions/Parts/Warranty
Gas Connector Selection Guide

• Tubing: Annealed, 304 stainless steel (ASTM A240)
• Coating: Custom Formulated Polymer
• Approved for indoor and outdoor use
• Temperature rating of connector with adapters: -40°F to 150°F
• Flare nuts: Brass or plated steel
• Adapters: Brass or plated steel Meets SAE J512 standard
• 100% factory leak tested
• Compliance: Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters - connector length may not exceed 36"

Technical Data
Spec Sheet
Installation Instructions/Parts/Warranty
Gas Connector Selection Guide

Related products